Siirry tuotetietoihin
1 / 1

Allsson

PPC - Top Coat

PPC - Top Coat

Normaalihinta €119,90 EUR
Normaalihinta Alennushinta €119,90 EUR
Alennusmyynti Loppuunmyyty
Sisältää verot. Toimituskulut lasketaan kassalla.
Finish
Määrä

The protective top layer that sets the sheen. Sprayed over any Allsson base coat, it seals the film, adds a self-healing surface that closes light swirls, and stays UV stable with no yellowing. Choose a gloss or matte finish.

Sold by the litre, as a 3-can kit. Each unit makes 1 L of mixed top coat: can 1 (0.5 L) + can 2 (0.25 L) + can 3 (0.25 L), mixed 2:1:1. Set the quantity to the number of litres you need (1 to 200 L). Gloss and Matte kits differ only in can 1.

Mixing & application

  • Mix cans 1, 2 and 3 at a 2:1:1 ratio immediately before spraying.
  • Apply a minimum of 2 layers over the cured base coats, 1.4 mm HVLP tip, 6–8 in (15–20 cm) from the panel, 50% overlap.
  • Flash 10 to 15 minutes between layers; work between 18 °C and 25 °C.
  • Clean the spray gun immediately after use — the mixed top coat cures fast.

Performance

  • Self-healing surface closes light swirls.
  • UV stable — no yellowing.
  • Resists road salt, fuel splash and bird lime.
  • Full cure in 24 h. Peels clean with the base coat for up to 20 years.

Professional installation required for warranty coverage.

Näytä kaikki tiedot